Wednesday, 30 November 2022

IWB Touchscreen Monitors

50" Interactive Whiteboard



Maximise the Value of Small Meetings to Achieve a Big Change

Sharp's HUDDLE BOARD series makes meetings and communications smoother and more productive. Reinforcing the line-up the 50-inch model, PN50TC1, that offer a fresh approach to boosting the dynamism of business and educational organisations. It’s ideal for meetings of two to six people held in small spaces—the so-called "huddle spaces" where a high proportion of meetings take place in the modern world. Making the most of huddle meetings can transform communications and accelerate business to a whole new level.

SHARP Pen Software, SHARP Display Connect, and SHARP Touch Viewer Software are bundled with the product. Running these programs requires a suitable PC with Windows® 7, or later.

  • 50" screen size
  • 10 point touch recognition
  • Touch-operated onscreen menu
  • Minimised glare and fingerprints
  • Mount for web camera
  • Landscape, portrait, or horizontal (face-up) orientation
  • Bundled stand for desktop set-up (landscape orientation)
  • 16-hour daily operation

Model Name



Landscape / Portrait / Face-up

LCD Panel

50-inch-class widescreen (125.7cm  diagonal) TFT LCD


Max. Resolution

1,920 x 1,080 pixels

Max. Display Colours (approx.)

16.77 million colours

Pixel Pitch (H x V)

0.571 x 0.571 mm

Max. Brightness (average)*1

400 cd/m2

Contrast Ratio

5,000 : 1

Viewing Angle (H/V)

178°/178°  (CR   10)

Active Screen Area (W x H) (approx.)

1095.8 x 616.4 mm

Response Time

9.5 ms (grey to grey, avg.)


LED, edge lit


Touch Technology

Capacitive touch

PC Connection Port

USB (2.0 compliant) (Type B) x 1

Power Supply

Supplied from main unit

Multi Touch

10 points

Protection Glass

Shock resistance: 130 cm*2

Computer Input


Analogue RGB (0.7 Vp-p) [750], HDMI, DisplayPort


Horizontal/vertical separation (TTL: positive/negative)

Plug & Play


Power Management


Input Terminals*3

PC analogue: Mini D-sub 15-pin x 1, HDMI™x 2 (HDCP and 1080p compatible, PC/AV signal compatible), DisplayPort™ (HDCP compatible, PC signal compatible) x 1, 3.5 mm-diameter mini stereo jack x 1, RS-232C x 1

Output Terminals*3

3.5 mm-diameter mini stereo jack x 1

Input/Output Terminals*3

LAN port (10Base-T/100Base-TX) x 1

USB Hub Function

USB 2.0 (Type A) x 2

Speaker Output

10 W + 10 W


VESA (4 points), 200 x 200 mm, M6 screw

Power Supply

100V – 240V AC, 50/60 Hz*4

Power Consumption


Environmental Conditions

Operating Temperature*5

5˚C to 35˚C

Operating Humidity

20% to 80% RH (no condensation)

Dimensions (W x D x H) (approx.) (display only)

1151 x 68.5 x  686 mm

Weight (approx.)

28 kg

Main Accessories

AC power cord, remote control unit, battery (AAA size) x 2, set-up manual, cable clamp x 3, camera mount, USB cable*6, logo sticker, pen tray, touch pen, CD-ROM, portrait installation operation label, SHARP Display Connect license x 1

*1 Brightness depends on input mode and other picture settings. Brightness level will decrease slightly over the lifetime of the product. Due to the physical limitations of the equipment, it is not possible to maintain a precisely constant level of brightness. 400 cd/m2 is the brightness of the LCD panel component. The brightness of the product itself may be less than this.
*2 Approximate distance at which the glass panel can withstand the impact of a 500-gram iron ball dropped on its centre.
*3 Use a commercially available connection cable for PC and other video connections. *4 The AC power cord is an inlet type. The cable is bundled (3 pins). *5 For face-up installation is 5˚C to 30˚C. *6 Please use only this USB cable and no other. If connected via a USB hub, a PC may not recognise the PN-50TC1 correctly and operation may be unstable.

DisplayPort and the DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the US and other countries. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Business Products Warranty Statement


This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.



Data Projector 24 months (excluding lamps and air filters)
Copier / Printer   6 months
Electronic Cash Registers 12 months
Facsimile 12 months
Information Display Panel 36 months
POS Terminals 12 months
AL Copier 12 months
Calculator 12 months
Personal Organiser 12 months

IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand