Tuesday, 19 November 2019

Professional Range

PNM501 50" SoC (System on Chip) Signage Monitor

Model:
PNM501

P.O.A.

Sharp's PNM501 SoC (System on Chip) professional monitor is designed to engage a variety of audiences.

  • 50" (125.73 m diagonal) size
  • Built-in SoC (System on a Chip)
  • Built-in Speakers
  • HDMI™x 2 plus VGA or compoent video inputs
  • DispalyPort™ x 1 video input
  • DispalyPort™ x 1 video output
  • RS232C or LAN input for control
  • Built-in media player for digital content on USB or SD card memory
  • 24-Hours Daily Operation 
  • Wireless connectivity option, PNZW01
  • Supports Face up / Face Down installation

Model Name

PN-M501

Installation

Landscape / Portrait / Face-up / Face-down

 

LCD Panel

50-inch-class (125.73 cm diagonal) TFT LCD

 

Max. Resolution

1,920 x 1,080 pixels

 

Max. Display Colours (approx.)

16.77 million colours

 

Pixel Pitch (H x V)

0.5708 x 0.5708 mm

Max. Brightness*1

450 cd/m2

 

Contrast Ratio

5,000 : 1

 

Viewing Angle (H/V)

178°/178° (CR ≥ 10)

 

Active Screen Area (W x H)

1,095.8 x 616.4 mm

Response Time

9.5 ms (grey to grey, avg.)

 

Backlight

LED, edge lit

 

Computer Input

Video

Analogue RGB (0.7 Vp-p) [75Ω], HDMI

 

Synchronisation

Horizontal/vertical separation (TTL: positive/negative)

 

Plug & Play

VESA DDC2B

 

Power Management

VESA DPMS

 

Input Terminals*2

DisplayPort™ x 1, Mini D-sub 15-pin x 1, HDMI™ x 2, RS-232C x 1, 3.5 mm-diameter mini stereo jack x 1

 

Output Terminals*2

DisplayPort™ x 1, RS-232C x 1, 3.5 mm-diameter mini stereo jack x 1

 

Android

OS

Android 4.4

 

CPU

Quad Core (Arm Cortex-A17 processor)

 

Memory

2 GB

 

Storage

8 GB

 

Input/Output Terminals

LAN port (10Base-T/100Base-TX/1000Base-T), SD card slot (SD/SDHC) x 1, USB port (2.0-compliant) x 3

 

Expansion Slot

12 V, 2.5 A (power supplied when expanding the functions with an optional part)

 

Speaker Output

7 W + 7 W

 

Mounting

VESA (4 points), 400 x 200 mm pitch, M6 screw

 

Power Supply

100 V – 240 V AC, 50/60 Hz

 

Power Consumption

120 W

Environmental Conditions

Operating Temperature*3

0˚C to 40˚C

 

Operating Humidity

20% to 80% RH (no condensation)

 

Dimensions (W x D x H) (approx.) (display only)

1,123 x 68 x 647 mm

Weight (approx.)

22 kg

Main Accessories

AC power cord, remote control unit, battery (AAA size) x 2, CD-ROM, set-up manual, cable clamp x 2, USB flash drive/SD card cover, USB flash drive/SD card cover fixing screw, logo sticker

 

*1 Brightness depends on input mode and other picture settings. Brightness level will decrease slightly over the lifetime of the product. Due to the physical limitations of the equipment, it is not possible to maintain a precisely constant level of brightness.

*2 Use a commercially available connection cable for PC and other video connections. *3 When using the monitor lying flat on a surface (when the monitor is tilted more than 20 degrees upward or downward from the perpendicular in relation to a level surface) the ambient temperature must be within the range of 0°C to 30°C. Temperature conditions may change when using the monitor together with the optional equipment. In such cases, check the temperature conditions specified by the optional equipment.

Arm and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the US and/or elsewhere. Android is a trademark of Google Inc. DisplayPort and the DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the United States and other countries. The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. All other brand names and product names may be trademarks or registered trademarks of their respective owners. All screen images are simulated. Design and specifications are subject to change without prior notice.


 
Business Products Warranty Statement

 

This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.

 

WARRANTY PERIODS

Data Projector 24 months (excluding lamps and air filters)
Copier / Printer   6 months
Electronic Cash Registers 12 months
Facsimile 12 months
Information Display Panel 36 months
POS Terminals 12 months
AL Copier 12 months
Calculator 12 months
Personal Organiser 12 months

IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand