Sunday, 31 May 2020

Professional Range

60" High Bright Pro Monitor


  • 60" (152.66cm diagonal) Screen size
  • Brilliant High Definition (1920 x 1080) LCD Display
  • 700 cd/m2 Brightness;  5000 : 1 Contrast Ratio
  • Built-in 10W per Channel Stereo Audio System
  • Landscape, Portrait, and Face-up Mode compatible
  • Engineered for 24/7 use
  • When it comes to digital signage, size and flexibility matter. Sharp’s PN-R606 professional LCD monitor offers 60 inches of high-impact screen space along with the  flexibility to match your installation location. Whether tilted or hung from the ceiling, this  eye-catching monitor has the size to convey your message clearly and vividly to your audience.
    DisplayPort™ 1.2 connectivity is standard, and the interface can be expanded with an optional wireless board or HDBaseT™ 2.0 receiver board. All this  flexibility gives you greater scope to create an appealing space and deliver a compelling message.
  • Model Name




    Landscape / Portrait / Face-up

    LCD Panel

    60-inch widescreen (152.66 cm diagonal) UV2A*1 LCD



    Max. Resolution

    1,920 x 1,080 pixels

    Max. Display Colours (approx.)

    1.06 billion colours

    Pixel Pitch (H x V)

    0.693 x 0.693 mm



    700 cd/m2

    Contrast Ratio

    5,000 : 1

    Viewing Angle (H/V)

    176° / 176° (CR ≥ 10) 

    Active Screen Area (W x H)

    1,330.56 x   748.44 mm


    Response Time

    8 ms (grey to grey, avg.)


    LED, edge lit

    Computer Input


    Analogue RGB (0.7 Vp-p) [75 O], Digital (DVI 1.0 standard-compliant),

    DisplayPort™1.2, HDMI™


    Horizontal/vertical separation (TTL: positive/negative), Sync on green*3, Composite sync (TTL: positive/negative)*3

    Plug & Play


    Power Management


    Input Terminals*4


    DisplayPort™ x 1, DVI-D 24-pin (HDCP compatible) x 1, Mini D-sub 15-pin x 1, HDMI™

    (PC/AV signal compatible) x 2, RS-232C x 1, 3.5 mm-diameter mini stereo jack x 1

    Output Terminals*4

      DisplayPort™ x 1, 3.5 mm-diameter mini stereo jack x 1, RS-232C x 1

    Input/Output Terminals*4

    LAN: 10Base-T/100Base-TX x 1

    Power Supply Terminal

    5 V, 2 A (5 V, 500 mA when the expansion slot is used) (USB type-A connector)

    Expansion Slot

    12 V, 2.4 A (power supplied when expanding the functions with an optional part)

    Built-in Speakers

    10 W + 10 W


    VESA (4 points), 400 mm  pitch, M6 screw

    Power Supply

      100 V – 240 V AC, 50/60 Hz

    Power Consumption

    190 W


    Environmental Conditions

    Operating Temperature*5

      0°C to 40°C 

    When using the monitor laying flat on a surface (when the monitor is tilted 20 degrees or more upward or downward from the perpendicular in relation to a level surface) the ambient temperature must be within the range of 0°C to 30°C.

    Operating Humidity

    20% to 80% RH (no condensation)

    Dimensions (W x D x H) (approx.; display only)

    1,349 x 60 x   775 mm


    Weight (approx.)

    33 kg


    Main Accessories

    AC power cord, remote control unit, battery (AAA size x 2), CD-ROM, set-up manual, cable clamp x 2, ceiling mounting bracket x 8, ceiling mounting bracket fixing screw x 24, logo sticker

    *1 UV2A stands for Ultraviolet-induced Multi-domain Vertical Alignment, a photo-alignment technology that ensures uniform alignment of liquid crystal molecules. *2 Brightness depends on input mode and other picture settings. Brightness level will decrease slightly over the lifetime of the product. Due to the physical limitations of the equipment, it is not possible to maintain a precisely constant level of brightness. *3 D-sub input terminal only. *4 Use a commercially available connection cable for PC and other video connections. *5 Temperature conditions may change when using the monitor together with the optional equipment recommended by Sharp. In such cases, please check the temperature conditions specified by the optional equipment.

    Business Products Warranty Statement


    This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

    In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

    This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

    Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

    This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

    Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.



    Data Projector 24 months (excluding lamps and air filters)
    Copier / Printer   6 months
    Electronic Cash Registers 12 months
    Facsimile 12 months
    Information Display Panel 36 months
    POS Terminals 12 months
    AL Copier 12 months
    Calculator 12 months
    Personal Organiser 12 months

    IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand