Tuesday, 19 November 2019

Professional Range

55" Videowall Monitor with UCCT

Uniform Colour Calibration Technology

Model:
PNV550A

P.O.A.

Sharp’s 55-Inch Full-HD Monitors Expand Choices for Video Wall Installations

  • 55" Full HD Video wall Monitor
  • Uniform Colour Calibration Technology (UCCT)
  • 3.5 mm  bezel-to-bezel distance
  • 24/7 operation
  • Installation: Portrait or Landscape


Model Name

PN-V550A

Installation

Landscape / Portrait

LCD Panel

55-inch widescreen (138.8 cm diagonal) TFT LCD

 

Max. Resolution

1,920 x 1,080 pixels

Max. Display Colours (approx.)

16.77 million colours

Pixel Pitch (H x V)

0.63 x 0.63 mm

Brightness*1

500 cd/m2 (default: 400 cd/m2)

Contrast Ratio*1

4,000 : 1

Viewing Angle (H/V)

178°/178° (CR≥ 10)

Active Screen Area (W x H)

1,209.6 x 680.4 mm

Response Time

8 ms (grey to grey, avg.)

Backlight

LED, full array

Computer Input

Video

Analogue RGB (0.7 Vp-p) [75Ω], Digital (conforms to DVI 1.0 standards), HDMI™ DisplayPort™1.1

Synchronisation

Horizontal/vertical separation (TTL: positive/negative), Sync-on-green*2, Composite sync*2 (TTL: positive/negative)

Plug & Play

VESA DDC2B

Power Management

VESA DPMS, DVI DMPM

Video Colour System

NTSC (3.58 MHz, 4.43 MHz), PAL, PAL60, SECAM

Input Terminals*3

HDMI™*4  x 1, Mini D-sub 15-pin x 1*5, video x 1*5, Component video x 1*5, DisplayPort™ x 1, DVI-I-29 pin (HDCP compatible) x 1,

3.5 mm-diameter mini stereo jack x 1, RS-232C x 1, D-sub 9-pin x 1, Control kit terminal x 1

Output Terminals*3

DisplayPort™*6  x 1, DVI-D 24-pin (HDCP compatible) x 1, 3.5 mm-diameter mini stereo jack x 1, RS-232C x 1

Input/Output Terminals*3

LAN port

Mounting

VESA (4 points), 400 mm pitch

Power Supply

100V—240V AC, 50/60 Hz

Power Consumption

185 W

Environmental Conditions

Operating Temperature

0°C to 40°C

Operating Humidity

20% to 80% RH (no condensation)

Dimensions*7 (W x D x H) (approx.)

1,213.5 x 113.8 x 684.3 mm

Weight (approx.)

25.0 kg

Main Accessories

Cable clamp x 4, cable clamp (insertion type) x 2, power cord x 1, CD-ROM x 1, set-up manual x 1, remote control sensor box mounting hole concealing sticker x 2

1 Brightness and contrast ratio depend on input mode and other picture settings. Brightness level will decrease slightly over the lifetime of the product. Due to the physical limitations of the equipment, it is not possible to maintain a precisely constant level of brightness. *2 D-sub input terminal only.  *3 Use a commercially available connection cable for PC and other video connections.  *4 For both PC and AV components.  *5 Analogue PC, video, and component video are switchable (via the bottom interface); use the menu to select. Note that video and component video inputs require a conversion cable connected via the mini D-sub 15-pin jack. *6 For video signals only. *7 Display only, not including protrusions.

DisplayPort and the DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the US and other countries. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.


 
Business Products Warranty Statement

 

This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.

 

WARRANTY PERIODS

Data Projector 24 months (excluding lamps and air filters)
Copier / Printer   6 months
Electronic Cash Registers 12 months
Facsimile 12 months
Information Display Panel 36 months
POS Terminals 12 months
AL Copier 12 months
Calculator 12 months
Personal Organiser 12 months

IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand