Sunday, 31 May 2020

Professional Range

70" Videowall Monitor with UCCT

Uniform Colour Calibration Technology



Superbly Colour–Accurate, Dynamic Video Walls for Inspiring Signage

  • 70" Full HD Video wall Monitor
  • Uniform Colour Calibration Technology (UCCT)
  • 4.4 mm  bezel-to-bezel distance
  • 24/7 operation
  • Installation: Portrait or Landscape

Model Name



Landscape / Portrait

LCD Panel

70-inch-class (69 1/2-inch [176.6 cm] diagonal) UV2A LCD


Max. Resolution

1,920 x 1,080 pixels

Max. Display Colours (approx.)

1.06 billion colours

Pixel Pitch (H x V)

0.802 x 0.802 mm


700 cd/m2

Contrast Ratio*1

4,000 : 1

Viewing Angle (H/V)

178°/178° >= (CR 10)

Active Screen Area (W x H)

1,538.9 x 865.6 mm

Response Time

6 ms (grey to grey, avg.)


LED, full array

Computer Input


 Analogue RGB (0.7 Vp-p) [75 Ohm], Digital (DVI 1.0 standard-compliant), DisplayPort™ 1.2, HDMI™


Horizontal/vertical separation (TTL: positive/negative), Sync-on-green*2, Composite sync*2 (TTL: positive/negative)

Plug & Play


Power Management


Input Terminals*3

HDMI™*4 x 2, Mini D-sub 15-pin x 1*5, DisplayPort™ x 1, 3.5 mm-diameter mini stereo jack x 1, RS-232C (D-sub 9-pin) x 1, Control kit terminal x 1, DVI-D 24-pin (HDCP compatible) x 1

Output Terminals*3

DisplayPort™*6 x 1, , 3.5 mm-diameter mini stereo jack x 1, RS-232C (D-sub 9-pin) x 1

Input/Output Terminals*3

LAN: 10Base-T/100Base-TX x 1

Expansion Slot

13 V, 2.0 A (power supplied when expanding the functions with an optional part)


VESA (4 points), 400 mm pitch

Power Supply

100V—240V AC, 50/60 Hz

Power Consumption

380 W

Environmental Conditions

Operating Temperature

0°C to 40°C

Operating Humidity

20% to 80% RH (no condensation)

Dimensions*7 (W x D x H) (approx.)

1,543.7 x 122 x 870.4 mm

Weight (approx.)

37.0 kg

Main Accessories

AC power cord, cable clamp x 6, CD-ROM, set-up manual, sticker x 2 (for concealing mounting hole of remote control sensor box)

*1 When uniformity is set to MODE 1. Brightness and contrast ratio depend on input mode and other picture settings. Brightness level will decrease slightly over the lifetime of the product. Due to the physical limitations of the equipment, it is not possible to maintain a precisely constant level of brightness. *2 D-sub input terminal only. *3 Use a commercially available connection cable for PC and other video connections. *4 For both PC and AV components. *5 Analogue PC, video, and component video are switchable (via the bottom interface); use the menu to select. Note that video and component video inputs require a conversion cable connected via the mini D-sub 15-pin jack. *6 For video signals only. *7 Display only, not including protrusions.


HDBaseT is a trademark of HDBaseT Alliance. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. DisplayPort and the DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the United States and other countries. All other brand names and product names may be trademarks or registered trademarks of their respective owners.



Business Products Warranty Statement


This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.



Data Projector 24 months (excluding lamps and air filters)
Copier / Printer   6 months
Electronic Cash Registers 12 months
Facsimile 12 months
Information Display Panel 36 months
POS Terminals 12 months
AL Copier 12 months
Calculator 12 months
Personal Organiser 12 months

IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand